MICRO-EPSILON reflectCONTROL RCS, Инструкция по эксплуатации

Страница: 42 / 134

Working with 3DInspect
Page 42

Save parameters to file: Saves the parameters of the active measuring programs to a
file (see Chapter
3.17.1 ).

Recent parameters: Loads previously saved or loaded parameters.

Reset parameters to factory default: Resets the parameters to factory default (see
Chapter
3.17.3 ).
3 - Options:
Fig. 3.60: "Options" menu

Main settings: Activates a dialog where you can make basic settings (see Chap-
ter
3.21 ).

3D-View Settings: Activates a dialog where you can configure the settings for the 2D-
and 3D-Views (see Chapter
3.11 ).
 Ethernet Configurator: Activates a dialog where you can modify the network settings
(IP address, etc.) of the sensors (see Chapter
3.22 ).

Language: Select the display language:

english [EN]: English.
 deutsch [DE]
: German.
4 - ?:
Fig. 3.61: "?" menu

About 3DInspect: Displays an information window about 3DInspect.

Online help: Opens the documentation for the current view.

Manual 3DInspect: Opens the instruction manual of 3DInspect.

Shortcuts: Opens an overview of the available key shortcuts (see Chapter 8.3 ).

Documentation: Opens an overview where you can call up various help and documen-
tation.
Note: Using the function key <F1> or the "?" button in the title bar of each option dialog, you can open
the documentation for the current view.
3.20 Functions of the “General” Toolbar
A summary of the functions of the "General" toolbar (see Fig. 3.62) can be seen in the following.
Fig. 3.62: "General" toolbar
Selects a sensor which is connected to the PC as data source (see Chapter
3.4 ).
Selects a file in which a point cloud have been saved previously as data source (see Chapter
3.5 ).
Saves the point cloud which has been lastly transferred by the connected sensor (see Chap-
ter
3.6 ).
Activates or deactivates the automatic saving of point clouds after each measuring operation
(see Chapter
3.6.2 and 3.21 , section 4).