MICRO-EPSILON ILD 1420-10, Инструкция по эксплуатации

Страница: 14 / 122

Page 14
Laser Safety
optoNCDT 1420
2.2 ILD1420 CL1
The optoNCDT 1420 CL1 sensors operate with a semiconductor laser with a wavelength of 670 nm (visible/
red). The maximum optical power is ≤ 0.39 mW. The sensors fall within Laser Class 1 (I).
The accessible radiation is harmless under predictable conditions. Impairment of color vision and incon-
venience may not excluded for class 1 laser devices, e. g. through glare. The following warning labels are
attached to the sensor cable:
P≤0,39 mW; λ =670 nm
IEC 60825-1:2015-07
THIS PRODUCT COMPLIES WITH FDA
REGULATIONS 21CFR 1040.10 AND 1040.11
CLASS 1 LASER PRODUCT
P≤0,39 mW;  =670 nm
Laser Klasse 1
nach DIN EN 60825-1:2015-07
Fig. 4 Laser warning labels on the sensor cable Fig. 5 Laser warning labels
on the sensor housing
Consequently, you can use Class 1 laser equipment without further protective measures. Class 1 lasers are
not subject to registration and a laser protection officer is not required. Laser operation is indicated by LED,
see Chap.
5.3 . The housing of the optical sensors may only be opened by the manufacturer, see Chap. 11.
For repair and service purposes the sensors must always be sent to the manufacturer.
P≤0,39 mW
;
λ =670 nm
IEC 60825-1:2015-07
THIS PRODUCT COMPLIES WITH F
DA
REGULATIONS 21CFR 1040.10 AND 1040.11
CLASS 1 L
ASER PRODUCT
Fig. 6 True reproduction of the sensor with its actual location of the warning labels, ILD 1420