MICRO-EPSILON IF2004/USB, Руководство по эксплуатации

Страница: 15 / 18

Page 15
Software Support with MEDAQLib
IF2004/USB
7. Software Support with MEDAQLib
MEDAQLib offers you a documented driver DLL. Therewith you embed the RS422/USB
converter and the connected sensors/controllers into an existing or a customized PC
software.
MEDAQLib
- contains a DLL, which can be imported into C, C++, VB, Delphi and many additional
programs,
- makes data conversion for you,
- works independent of the used interface type,
- features by identical functions for the communication (commands),
- provides a consistent transmission format for all MICRO-EPSILON sensors.
For C/C++ programmers MEDAQLib contains an additional header file and a library file.
You will find the latest driver / program routine at:
www.micro-epsilon.de/download
www.micro-epsilon.de/link/software/medaqlib
8. Liability for Material Defects
All components of the device have been checked and tested for functionality at the
factory. However, if defects occur despite our careful quality control, MICRO-EPSILON or
your dealer must be notified immediately.
The liability for material defects is 12 months from delivery. Within this period defective
parts, except for wearing parts, will be repaired or replaced free of charge, if the device
is returned to MICRO-EPSILON with shipping costs prepaid. Any damage that is caused
by improper handling, the use of force or by repairs or modifications by third parties is
not covered by the liability for material defects. Repairs are carried out exclusively by
MICRO-EPSILON.
Further claims can not be made. Claims arising from the purchase contract remain
unaffected. In particular, MICRO-EPSILON shall not be liable for any consequential,
special, indirect or incidental damage. In the interest of further development, MICRO-
EPSILON reserves the right to make design changes without notification.
For translations into other languages, the German version shall prevail.
9. Service, Repair
If the converter or the USB cable is defective:
- Please send us the affected parts for repair
or exchange.
In the cause of a fault cannot be clearly identi-
fied, please send the entire measuring system
to:
MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Königbacher Strasse 15
94496 Ortenburg / Germany
Tel. +49 (0) 8542 / 168-0
Fax +49 (0) 8542 / 168-90
info@micro-epsilon.de
www.micro-epsilon.com
10. Decommissioning, Disposal
Remove all cables from the converter.
Incorrect disposal may cause harm to the environment.
Dispose of the device, its components and accessories, as well as the packaging
materials in compliance with the applicable country-specific waste treatment and
disposal regulations of the region of use.