MICRO-EPSILON ELTROTEC Endolight FOT Halogen 150, Инструкция по эксплуатации

Страница: 16 / 28

Page 16
Operation
ELTROTEC Endolight FOT Halogen 150
5.5 Changing the Lamp
Let the light source cool off for a few minutes before changing the lamp.
> Risk of burns by the still hot lamp
Do not touch the inside of the lamp (mirror, lamp bulb).
> Reducing the intensity and lifetime of the lamp by finger prints and dust
Switch off the
ON/OFF
switch, see Fig. 3 and disconnect the power supply cable from the wall socket.
Remove the screw, see Fig. 3 , on the front side of the light source ( 1 ), whereupon the right front door
with the lamp unit can be folded down ( 2 ).
Loosen the lamp out of the holder carefully ( 3 ), lift the spring clip slightly ( 4 ) and pull the lamp from the
lamp socket ( 5 ).
1 Remove the screw
2 Fold down
lamp unit
Holder
3 Remove
holder
CAUTION
NOTICE