Page 26
Installation and Assembly
induSENSOR, EDS
4.4
Pin Assignment for Power Supply and Output
4.4.1
EDS- ... -S Model
The 7-pin connector on the sensor housing ensures power supply and signal output.
View on solder
pin side
Fig. 18 7-pole M9
cable connector (Bin-
der, type 702)
Pin
Assignment
Color
(Cable: C703-x)
1
Pin 2 and pin 4 are
connected internally on
the sensor electronics.
The shield of the sen-
sor cable is connected
to the housing of the
cable socket.
1
Power supply + (18 ... 30 VDC)
White
2
0 V Ground
Brown
3
I
OUT
4 ... 20 mA
2
Green
4
Signal ground
Yellow
5
Assigned internally
Gray
6
Assigned internally
Pink
7
Not assigned
Blue
Fig. 19 Pin assignment for power supply and analog output
Connect the shield of the sensor cable with the protective ground on the supply side.
1) The C703-5 sensor cable is available as an optional accessory, see Appendix.
2) Output voltage of 1 ... 5 V with the C703-5/U supply and output cable.
