MICRO-EPSILON colorCONTROL MFA, Руководство по эксплуатации

Страница: 34 / 44

Page 34
Appendix | ASCII Communication with Sensor
colorCONTROL MFA-7/-14/-21/-28
A 4.1 Commands Overview
Group Chapter Command Brief information
System
Chap. A 4.2.1 HELP Help on commands
Chap. A 4.2.2 GETINFO Request sensor information
Chap. A 4.2.3 STATUS Output of information via individual or all measuring channels
Chap. A 4.2.4 PRINT Output of all sensor settings
Chap. A 4.2.5 PRINT ALL Output of measurement settings and sensor information
Chap. A 4.2.6 GETCHANNELCNT Indicates number of available channels
Chap. A 4.2.7 BASICSETTINGS Load/save device settings
Chap. A 4.2.8 MEASSETTINGS Load/save measurement settings
Chap. A 4.2.9 RESET Reboot sensor
Chap. A 4.2.10 RESETCNT Reset counter
Chap. A 4.2.11 SETDEFAULT Factory settings
Communication
Chap. A 4.3.1 BAUDRATE Set transmission rate of serial interface
Chap. A 4.3.2 OUTPUT Activate or deactivate measured value output stream
Chap. A 4.3.3 DATARATE Set the data rate for synchronous data output
Chap. A 4.3.4 OUT Selection of output values for serial interface
Chap. A 4.3.5 GETOUTINFO Listing of output values of serial interface
Adjustment / Reference
Chap. A 4.4.1 DARKCORR Sets the dark correction based on the current measurement.
Chap. A 4.4.2 DARKCORR_OFFSET Manual setting or querying of current dark correction
Chap. A 4.4.3 WHITECORR Sets a white correction based on the current measured value.
Chap. A 4.4.4
WHITECORR_FAC-
TOR Adapts the dynamic range (receiving sensitivity) to the required
measuring situation
Measurement
Chap. A 4.5.1 AUTOGAIN
Automatic determination of a sensible combination of integration
time and amplification in order to obtain the best possible range
of values
Chap. A 4.5.2 GAIN Setting the gain level
Chap. A 4.5.3 INTEGRATIONTIME Set exposure time
Chap. A 4.5.4 AVERAGING Set moving average of measured values
Chap. A 4.5.5 COLORSPACE Setting a color space for output
Chap. A 4.5.6 GETMEASURE Output of a measurement result for selected channels