Page 11
Mounting
capaNCDT CST6110
4.
Mounting
4.1
Sensor, Sensor Cable
The sensor features an M5 x 0.8 thread, which can be used to install it.
0.8
0.0
-0.1
40
(1.57)
M5 DIN439
±0.3
50
(1.97)
±2
40
±5
42
(1.57)
(1.65)
10 (.39)
±1
ø3.7
(.15 dia)
ø4.7
(.19 dia)
ø3.1
(.12 dia)
ø7 (.28 dia)
ø4.5
(.18 dia)
ø4.7
(.19 dia)
M5x0.8
±0.1
Cable length 1.0 m ±10 mm
i
Never bend the sensor cable more tightly than
the permitted bending radius:
10 x diameter for dynamic use,
5 x diameter for static use
i
The calibrated sensor cables must not be short-
ened, because this changes the calibration of
the measuring system.
Fig. 2 CSE025 sensor featuring integrated cable with thermal protection sleeve
Lay the sensor cable in such a way that no sharp or heavy objects affect the cable sheath. Do not kink the cable.
Always fasten the sensor position with a locknut.
Active measuring surface
