MICRO-EPSILON capaNCDT 6100, Инструкция по эксплуатации

Страница: 61 / 62

Page 61
Appendix
English
capaNCDT 6100
Appendix 9.
MC2.5 Micrometer calibration fixture, range 0 - 2.5 mm, division 0.1 µm, for sensors CS05 to CS1
MC25D Digital micrometer calibration fixture, range 0 - 25 mm, adjustable offset, for all sensors
PS2020 Power supply 24 V / 2.5 A; input 100 - 240 VAC, output 24 VDC / 2.5 A; Mounting on symmetri-
cal DIN rail 35 mm x 7.5 mm, DIN 50022; for max. 4 multifunction controller DT 3301
FC8 8-pin cable socket DIN 45326
PC3/8 Power- and output cable, 3 m (9.84 ft) long, 8-wire
SC30 Synchroniztion cable, 30 cm long
CSP 301 Digital signal processing unit with display for synchronous processing of 2 channels
Sensors, sensor cable, see Chap.
4.2 , see Chap. 4.3
SWH Vacuum feed through
34 (1.34)
max. 17
(.67)
2 (0.08)
9
(.35)
13.8 (.54)
WS12
M10x0.75
14
(.55)