MICRO-EPSILON 4350127.256, Руководство по эксплуатации

Страница: 8 / 173

Page 8
Overview, Technical Data, Safety Instructions
thicknessCONTROL MTS 8202.LLT / 4350127.256
Protect air hoses, water-carrying hoses and avoid heavy soiling, e.g. on the sensors or
on possible cooling units.
> Failure of the measuring device
Personnel training must also include the safety aspects.
- Improper use: Any use other than that listed above is prohibited. Hazards can occur
with improper use. The personal protective equipment necessary must be provided by
the operating company (customer).
- Protective equipment: All protective equipment, including the devices installed by the
operating company, must be properly installed and functional before each start-up.
Safety devices may only be removed when the measuring machine is shut down and
protected against restarting (e.g. padlock on the main switch).
- Informal safety precautions: The operating instructions must always be kept at the
measuring machine. In addition to the operating instructions, the generally applicable
and local regulations for accident prevention and environmental protection must also
be provided and observed. All safety instructions and hazard warnings on the measur-
ing machine must be kept in legible condition and replaced as needed.
- Safety precautions in normal operation: Before the measuring machine is switched
on, it must be ensured that nobody can be endangered from the machine startup. The
measuring machine must be checked for external damage and the safety equipment
for functionality at least once a day.
1.3.4 Maintenance and Repair
- Maintenance and repair: Specified adjustment, maintenance, and inspection work
must be carried out at the specified intervals
, see 7.
- Structural modifications to the measuring machine: No modifications, attachments to,
or conversions of the measuring machine may be made without the permission of the
manufacturer. All conversion measures require the written approval of Micro-Epsilon
Messtechnik GmbH & Co. KG. Parts of the system that are not in trouble-free condition
must be replaced immediately. In addition, only original spare and wear parts must be
used. Parts obtained from third parties are not guaranteed to have the correct design
with regard to load and safety.
- Cleaning and disposal of the measuring machine: The substances and materials used
must be handled and disposed of properly, in particular when:
ƒ
working on lubrication systems and equipment
ƒ cleaning with solvents
- System noise: The continuous sound pressure level emitted by the system is less than
70 db(A).
1.4 Training of personnel
- Only trained and instructed personnel are permitted to work on the system.
- The responsibilities of personnel for operating, retooling, and maintenance must be
clearly specified. Personnel undergoing training are only permitted to work on the
system under the supervision of an experienced person.
ƒ
Only trained personnel are permitted to operate the controller.
ƒ
The training should be acknowledged in writing.
User group Task Qualification/impairments
Skilled personnel
Initial operation, mainte-
nance, repair
Specialist training
Operating personnel Operation Instruction, experienced/trained
CAUTION
Crushing or shear-
ing hazard caused by
uncontrolled movement
or moving parts of the
measuring machine if
protective equipment is
manipulated