Micos ORM 2 Скачать руководство пользователя

Страница: 4 / 4

491198

Assembly procedure:

Set ORM 2.

Remove the cover.

Fix the base with 2 screws.

Choose suitable panel for incoming micro-

tube or micro-cable and slide it into a
bottom part of ORM2.

Choose suitable panel for connector(s).

Click or screw required adapter and slide
it into a bottom of ORM2.

Fix the incoming micro-tube or micro-

cable using PVC draw band.

Using an appropriate tool, remove the

external sheathing from the cable end and
clean the gel, if any, along at least 2 m.

Comply with min. band radius. Splice the

fibres and place them in 40mm heat
shrink protection. Fix the heat shrink
splices into a splice holder.

Fit the cover back.

10. The operations specified in Paragraphs 1-9 may only be performed by an authorized technician.

Содержание ORM 2

Страница 1: ...stanoven technologick postupy a byl pou it p edepsan materi l v souladu s normou ISO 9001 Z ruka V robce ru za vady v robku vznikl v z ru n dob prokazateln vadn m materi lem chybnou konstrukc nebo vad...

Страница 2: ...adapt ry a nasa te jej do spodn ho d lu krabi ky 6 Do panelu vstup v stup vsu te mikrotrubi ky nebo opto kabely a zafixujte je pomoc PVC p sk 7 Odstra te vhodn m n strojem vn j pl z konce kabelu a o i...

Страница 3: ...r guarantees for product imperfections arised within period of warranty due to the demonstrably deficient material error in design or deficiencies in manufacture Such a deficiencies shall be repaired...

Страница 4: ...it into a bottom of ORM2 6 Fix the incoming micro tube or micro cable using PVC draw band 7 Using an appropriate tool remove the external sheathing from the cable end and clean the gel if any along at...