Micon M1500-600/150kW 50Hz
Manual
UK1500.PM6
Rev. 95-06-23 OKK
2.1
2.2
2.3
Manual stop/start
Operation and inspection
Manual stop
Press
red stop
on the control panel, or
stop
on the display keypad to activate.
The mill will brake to a halt and can only be
restarted manually.
Manual start
The mill can be started manually by pressing the
green
start button on the control panel, or
start
on the display keypad - if the computer has
confirmed there are no other current faults.
Power supply
pilot light
Brake release
pilot light
Display
Stop/reset button
Start button
(red stop)
6
2
Automatic operation
The windmill is equipped with a computer that
monitors the running of the mill, making it
unnecessary to operate the mill manually.
Should a fault occur with the mill or the electricity
grid, the mill will stop, and the nature of the fault
can be seen on the control panel
See chapter 3, Status Displays
Individual faults and their remedies are described
under "Fault Description".
See chapter 3.5
After certain types of fault have occurred, the
windmill will restart automatically once the central
computer has checked the mill and the electricity
grid.
Unless the same fault occurs twice within
one hour.
In which case, the windmill must be
started manually from within the mill itself, or via
the remote control (if applicable).
(See Fault Code Table, chapter 3.6)
Note that there is a time-delay, from
when the start button is pressed until
the mill starts. i.e. Until the brake
releases.
(Brake cooling time: 600 seconds)
If irregularities such as
abnormal noise
- vibrations - oil leaks
etc., do not
activate a fault warning at the computer,
the mill must be
stopped
immediately
and
contact Mikon's
Service Department without delay.
See chapter 2.9 Inspection
In addition to monitoring and controlling the mill's
running, the computer collects and logs all relevant
running data.
See chapter 3.2 - 4
Control panel and display
NB. The red stop button on the control
panel must be reset (released). There
is a time-delay from button activation
to brake release.
(The button is released by turning)
