Michell Instruments XZR200 страница 10 Скачать руководство пользователя

Страница: 10 / 36

XZR200 User’s Manual

Michell Instruments

INSTALLATION

2 OPERATION

The XZR200 is designed as a

t and forget device. Once con

gured, installed and all

electrical connections made, there are no further operating instructions required. Only

routine inspection and calibration of the unit is required. The inspection is more a

preventative measure to ensure the surrounding environment or any other factor is not

damaging or interfering with the performance of the analyzer.

2.1 Confi guration

The XZR200 may be recon

gured at any time by adjusting the position of the header

pin jumper links on the interface PCB.

Prior to re-confi guration the unit MUST be powered down. The

jumper links MUST also be re-positioned correctly and in the

correct orientation.

Failure to adhere to the above could result in product damage.

Products damaged due to incorrect confi gurations will not be

covered under warranty.

Power down the analyzer

Remove the lid using a Phillips (cross head) screwdriver.

Adjust the position of the jumper links to the desired con

guration.

Thin-nosed pliers should be used to remove and replace the jumper links. Ensure the

jumper links are correctly seated before reapplying the power.

JUMPER LINKS

RS232 Rx

0 to 10 VDC OUTPUT

RS232 Tx

4-20mA OUTPUT

Figure 1

Jumper Con

guration for Output Selection

When selecting the output, you must choose either 4-20mA and 0 to 10 V DC or RS232

Tx and Rx. Ensure the jumper links are always inserted horizontally between 2 adjacent

pins. Place the jumper link(s) into the relevant position(s). Two jumper links are required

for RS232 (positions 1 & 3) and only one jumper link is required for either 0-10 VDC

(position 2) or 4-20 (position 4).

NOTE: If only using one jumper link make sure

the other jumper link is stored safely for future use.

Содержание XZR200





































Результаты поиска

Содержание XZR200

Отзывы:

Похожие инструкции для XZR200

Бренды по названию

Популярные бренды

Michell Instruments XZR200, Руководство пользователя

Результаты поиска

Содержание XZR200

Отзывы:

Похожие инструкции для XZR200

Бренды по названию

Популярные бренды