Michell Instruments Liquidew I.S. Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 66

Michell Instruments Liquidew I.S. Скачать руководство пользователя страница 15

Liquidew I.S. User Manual

Michell Instruments

7

INSTALLATION

2.2

Environmental Requirements

The Liquidew I.S. sensor assembly is intrinsically safe and designed to be installed on-

site, indoors or outdoors, directly at the point of measurement within a Hazardous Area.

The sensor assembly is ATEX, IECEx, UKCA and QPS certified. To operate correctly,

the sensor assembly must be installed within a suitable sampling system (Michell

Instruments can supply standard and custom designed sampling systems).

The Liquidew I.S. control unit is NOT designed for use in a Hazardous Area and should

only be installed in a safe area. The control unit is intended for indoor installation only

and operates within environmental limits of 0...+50 °C (+32...+122 °F) and <90 %rh.

The control unit contains built-in isolation barriers permitting connection, direct from

the Hazardous Area, of the Liquidew I.S. sensor assembly.

2.3

Mounting

2.3.1 Control Unit Installation

The Liquidew I.S. control unit is contained in a 19” sub-rack case (size 3U). It should be

installed in a 19” rack using the mounting holes provided. It must be placed in a position

free from any appreciable vibration and shaded from direct sunlight.

NOTE: The materials and construction of the control unit allow for operation

in an indoor, clean, non-hazardous only, control room environment.

483

133

349

16

Figure 4

Dimensions of the Control Unit (in mm)

«
...
13
14
15
16
17
...
»

Содержание Liquidew I.S.



































































Отзывы:

Нет отзывов