manualshive.com logo in svg

Michell Instruments HygroCal100, Руководство пользователя, Страница: 33 / 54

Поделиться
Скачать
Michell Instruments HygroCal100 Скачать руководство пользователя страница 33

HygroCal100 User’s Manual

Michell Instruments

 

 

25

OPERATION

3.5 Port 

Adaptors

The HygroCal100 is fi tted with 8 M30 probe test ports. Each of these is fi tted with an 

adaptor to convert it to one of a variety of probe tube diameter sizes.

Figure 28 

Port Adaptor

The HygroCal100 is supplied with your choice of port adaptor size - additional adaptors 

can be ordered. 

Port adaptors suitable for the following probe sizes are available:

Probe Diameter

Order Code

12mm (0.47")

A000291

13.5mm (0.53")

A000292

14mm (0.55")

A000293

15mm (0.59")

A000294

18.5mm (0.73")

A000295

19mm (0.75")

A000296

24mm (0.94")

A000297

25mm (0.98")

A000298

Table 7 

Port Adapter Order Codes

Adaptors can be installed or removed using the Port Adaptor Tool (A000265). Take care 

to ensure that the port adaptor is properly aligned with the thread before tightening.

Figure 29 

Port Adaptor Tool

3.6 Probe 

Installation

3.6.1 Chamber 

Connection

To install a probe into the HygroCal100 chamber, fi rstly ensure that you have the correct 

port adaptor size for the diameter of the probe. 

1. 

Remove the blanking plug from the port adaptor and keep it safe. 

2. 

Install the probe into the port adaptor - ensure that the probe is inserted 

as far as possible into the chamber as is possible while maintaining a 

good seal to the sensor body tube.

Содержание HygroCal100























































Отзывы:

Нет отзывов