Michell Instruments Easidew PRO, Руководство пользователя

Страница: 21 / 58

I.S. Field Display User’s Manual
Michell Instruments 15
OPERATION
3.1.8 Tare Function: ‘
tArE
’
The tare function is primarily intended for use with a weighing system.
3.1.9 Security Code: ‘
CodE
’
Access to the instrument Con fi guration Menu may be protected by a four-digit security
code which must be entered to gain access. New instruments are con fi gured with
the default security code
0000
which allows unrestricted access to all con fi guration
functions.
To enter a new security code, select
CodE
from the Con fi guration Menu and press
P
which will cause the instrument to display the existing security code with one digit
fl ashing. The fl ashing digit can be adjusted using

or

. When set as required,
pressing
P
will transfer control to the next digit. When all the digits have been adjusted,
press
E
to return to the
CodE
prompt in the Con fi guration Menu. The revised security
code will be activated when the I.S. Field Display is returned to the display mode.
Please contact Michell Instruments (see contact details at www.michell.com) if the
security code is lost.
3.1.10 Reset to Factory Defaults: ‘
rSEt
’
This function enables the I.S. Field Display and the lineariser to be quickly returned to
the factory default con fi gurations shown in Section 3.1.
To reset the I.S. Field Display or lineariser, select
rSEt
from the Con fi guration Menu and
press
P
. The instrument will display one of the reset options
ConF
or
LtAb
.
ConF
Resets the I.S. Field Display to defaults
LtAb
Resets the lineariser to defaults
Using

or

, select the required sub-function and press
P
. To prevent accidental
resetting the request must be con fi rmed by entering
5urE
. Using

, set the fi rst fl ashing
digit to
5
and press
P
to transfer control to the second digit which should be set to
u
.
When
5urE
has been entered, press
E
to reset the selected Con fi guration Menus and
return the display to the
rSEt
function in the Con fi guration Menu.