operating
instructions
mpx
1700
8
operating
instructions
servicing
of
a
double
-
insulated
appliance
(
cont
)
Pump
Inlet
Garden
Hose
Garden
Hose
Adapter
High
Pressure
Hose
Pump Outlet
‧
∙
Pressure washer is not meant to
pump hot water. NEVER con-
nect it to a hot water supply as
it will significantly reduce the
life of the pump.
Max inlet wa-
ter supply temperature 122° F.
‧
∙
NEVER store the pressure wash-
er outdoors or where it could
freeze. The pump will be seri-
ously damaged.
‧
∙
Release trigger when chang-
ing from high to low pressure
modes. Failure to do so could
result in damage.
3. Install non-threaded end of high
pressure hose to gun.
4. Press release button on bottom
of gun toward back of the gun,
then insert high pressure hose.
Keep hose away from sharp ob-
jects. Bursting hoses may cause
injury. Examine hoses regularly
and replace if damaged. Do not
attempt to mend a damaged hose.
6. Insert lance into the extension
by pushing and turning clock-
wise at the same time. Push and
turn counterclockwise to re-
move.
1. Remove shipping cap from back
of pressure washer (if supplied).
2. Press release button on the left
of the pump outlet, then insert
high pressure hose.
7. Remove shipping cap from front
of pressure washer and fix the
inlet adapter with filter.
5. Insert extension into the gun
and turning clockwise. Turn
counterclockwise to remove.
mpx1700_en.indd 8
22/02/10 09:05
