Michco ScrubMaster 30R, Руководство по обслуживанию

Страница: 21 / 25

20
ADDITIONAL MAINTENANCE PROCEDURES
2. CYLINDRICAL BRUSH REPLACEMENT
1. Connect the battery connector (1).
2. Turn the key ON (2).
3. Lift the squeegee (3).
4. Return the key to the OFF (4) position, remove from key switch.
3. RECOVERY TANK CLEANING
1. Unscrew the drain plug and empty the tank.
2. Unscrew the drain hose knobs and rotate the flange.
3. Rinse the tank and clean the tank opening.
4. Check the condition and positioning of the gasket.
5. Reassemble.
1. REPLACEMENT OF THE SPLASH GUARD
Periodically check the condition of the splash guard on the brush base. If it is necessary
to replace it, proceed as follows:
1.
Remove the covers by slipping off the clips (1).
2. Unscrew the retaining blades from the splash guards.
3. Replace the splash guards and reassemble.
5. Unscrew the wing nut (1).
6. Rotate the spring (2).
7. Take off the end covers (3).
8. Replace the brushes and reassemble.