Michco ScrubMaster 30R, Руководство по обслуживанию

Страница: 14 / 25

13
2. MANUAL OPERATION
The machine may also be operated in manual mode. However, each operation must be
activated separately by the user (vacuum motor, brush motors, solenoid valve, squeegee
and brush base movement).
OPERATION
If a problem occurs during operation with the machine:
1. Immediately turn off the key (1).
2. Disconnect the battery connector from the machine connector (2).
3. Activate the emergency brake, push down and back (3) until coupled.
These actions will disconnect all functions of the machine.
Common conditions that an operator should be aware of:
•
The machine will not start if the operator is not properly seated!
•
When the solution tank is empty, the signal light (1) on the instrument panel will
turn on.
•
When the recovery tank is full, the vacuum motor (2) and the cylindrical brush
motor (3), along with their respective signal lights will switch off.
•
After the recovery tank is emptied, it is necessary to turn the main key switch off,
then on again to restart the machine.
•
The batteries must be recharged within a few minutes after the battery indicator
starts to blink “0” (4). Remember, the brush motor automatically switches off
after the “0” begins to blink.