Michco EDIC AQUA-DRI 3007ADN, Руководство пользователя и список запасных частей

Страница: 3 / 8

BEFORE OPERATING THIS MACHINE
Read this manual carefully and completely before attempting to operate this unit. This manual
has important information for the use and safe operation of the machine. Keep this manual handy at
all times. This machine will assure years of satisfactory service if operated and maintained according to
recommendations in this manual. If additional information is needed, please contact EDIC at 1-800-
338-EDIC or write to:
EDIC
1753 Blake Ave.
Los Angeles, CA 90031
Electrical – 120 Volt
This machine is designed to operate on a standard 15 amp, 120volt, 60 Hz, AC circuit. Voltages below
105 volts AC or above 125 volts AC could cause serious damage to the motor.
Electrical – 240 Volt
This machine is designed to operate on a standard 10 amp, 240 volt, 50 Hz, AC circuit
IMPORTANT SAFETY INSTRUCTIONS, READ AND SAVE THESE
INSTRUCTIONS BEFORE USING
DANGER!
• Improper connection of the equipment – grounding conductor can result in a risk of fire,
electric shock or injury to person.
Check with a qualified electrician or service person if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug provided with the air mover – if it will not fit the outlet,
have a proper outlet installed by a qualified electrician.
WARNING!
•
This equipment is not designed to handle or use combustible / volatile substances such as gasoline
or kerosene, in, on, or near the machine. The use of such materials will cause an extreme
hazardous condition.
•
Disconnect the power cord from the outlet before servicing.
•
Do not immerse or use this machine in standing water. Such use may cause electric shock.
•
Ensure children do not have access to the equipment. Do not allow children to play with or near
the unit or in its air flow.
•
Do not use with damaged cord or plug. If air mover is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, return it to a qualified service center.
• Do not operate any fan with a damaged cord or plug. Discard fan or return to a qualified service
facility for examination and/or repair.
• When using an extension cord, use only a 3-prong conductor grounding cord- 12 gauge wire or
heavier.