
Copyright © 2009-2016 Micca. All rights reserved.
Page | 1
1 Introduction
Thank you for your purchase! The USB audio DAC and preamplifier is a studio master
grade digital audio playback device that supports high resolution PCM audio up to 24-bit/192kHz
and DSD64 audio. Use the to bypass your computer's soundcard and unlock the full
potential of your music.
1.1 Features
1.1.1 Input and Output
Asynchronous USB 2.0 input for use with Windows XP/7/8/8.1/10, and MAC OSX.
Optical S/PDIF digital input. Switch selectable between USB or Optical input.
Front 3.5mm and 1/4” stereo headphone outputs. Powerful built-in headphone amp supports
16-600
Ω
headphones. Switch selectable between headphone or rear analog stereo output.
Rear 3.5mm analog stereo and combination optical S/PDIF digital output.
1.1.2 Digital Stream Formats
PCM audio up to 24-bit/192kHz over USB and Optical inputs
DSD64 (2.8MHz), Native or DoP over USB input
ASIO support over USB input
WASAPI Push/Event support over USB input
1.1.3 Key Components
VIA VT1736 USB 2.0 High Speed 480Mbps audio controller
Cirrus Logic CS4392 Stereo D/A Converter
JRC NJM4556 operational amplifier
1.1.4 What’s Included
Micca unit
USB cable
3.5mm to RCA audio cable
User’s Manual
Note: All the information contained in this manual was correct at the time of publication.
However, as our engineers are always updating and improving the product, your device’s
software may have a slightly different appearance or modified functionality than presented in
this manual.