3:Set sample rate, start mode to record
Select
“second(0~59)” time interval.
Select 5 start modes from: ”Immediately”,“Schedule”,“Real-time” (PC is
always connected with the logger unit),”Key start” (Start recording by
pressing button)
.
“hour(1~6), “minute(0~59)”,
and “Roll-over”
BASIC:(Pic.3)
1:ID setting
Maximum 20 characters , name your logger ,press OK button to confirm.
2:Current Date/Time
Clock setting, the system automatically shows current date and time of
your pc. Press OK to confirm.(Note:Schedule date & time refer to current
pc date
3
:
LCD display set
(N/A for non-LCD models)
Press ON ( Logger LCD still illuminated after complete recording ), or OFF(
LCD is not illuminated after complete recording. Press OK after selection.
ALARM&SENSOR:(Pic.4)
Select Temp./Humidity alarm, set Hi/Lo Temp. and H/Lo Humidity values.
Select the parameter you want to record.
SETTING:(Pic.5)
1
:
Set sample point (K=1,000 multiple basis within total memory points)
For examples:
16K memory store 8,000 points each of 2 parameters
store 16,000 points of selected parameter
32K memory store 16,000 points each of 2 parameters
or store 32,000 points of selected parameter
Press OK to confirm the sample points and parameters.
(Pic.3)
(Pic.4)
(Pic.5)
2:Select Unit :
Select Temperature unit °C/°F,press OK to confirm.
Logger Setting:
15