4. The screen of logger software as below:
5
.
Click “Setting” ”Comm port “ select the port number as you
see from step 2, then press OK button.
Reminder:
Software is installed completed,”Get Datalog’s
Identifier”shows below, then press SETTING button to enter Log
setting(pic.1)
Note: If logger is not plugged in USB port, the warning message
“Reminder: Data Logger is not plugged in USB port!” shows
below(pic.2)Make sure logger is plugged in and choose the correct
COM port.
(Pic.1)
(Pic.2)
LOGGER Status:
Before download data, press
LOGGER status
to show ID, Records,
Sample rate, Unit.
NOTE: Once
Download
button is pressed, recording is inactivated.
3.Clck below
14