10
Mi-T-M
®
Pit Cleaner Operator's Manual
PIT CLEANER ASSEMBLY INSTRUCTIONS
PIT
-0023-1
11099-JTR
1. Main Wand Assembly
2. Extension Assembly
3. Sludge Pump Assembly
4. Lance Assembly
1. Screw main wand assembly into extension assembly. Make sure there is an adequate amount of Teflon tape on the
male adapter of the main wand assembly.
2. Insert the sludge pump assembly into the coupler on the extension assembly and pull the levers back to lock in
place.
3. Attach the lance assembly to the main wand assembly by pressing the pipe into the clamps until the clamps are
fastened securely (two clicks).
4. Attach the quick connect from the lance assembly to the plug of the sludge pump assembly.
