background image

Mi-T-M

 Pit Cleaner Operator's Manual    

 

 

 

 

 

 

 

                 5

The Mi-T-M Pit Cleaning System uses your existing Pressure Washer to operate a high volume Sludge Pump. This 

Sludge Pump will move liquids, sludge, and solid debris from the bottom of a pit, through 1 ½” PVC pipe and hose, into 

the Sludge Cart where it is deposited into a Filtration Bag.  The Filtration Bag may then be disposed of in any manner 

compliant with EPA standards.

The Pit Cleaner connects to your Mi-T-M pressure washer in place of its standard gun/lance assembly, and uses the 

force of the high pressure water to create a vacuum to remove debris and sludge from the pit.  The Pit Cleaner comes 

with a #4 nozzle which will work with a variety of pressure washers ranging from 1000-4000 PSI and 2–4 GPM.  The Pit 

Cleaner has a 1:11 flow ratio; a 3 GPM pressure washer will produce a flow of 33 GPM.  The more powerful the pressure 

washer, the higher volume of debris is removed from the pit.

NOTE:  The actual output volumes will vary with the weight and particle size of the material being removed and the 

height and distance that the material is moved.  For best results with heavier or larger particles use a pressure 

and flow nearer to the high end of the suggested pressure and flow.

The following is a chart showing the relationship of pressure and flow for various nozzles in GPM.

PURPOSE

Nozzle Number

1000 PSI

1500 PSI

2000 PSI

2500 PSI

3000 PSI

3500 PSI

4000 PSI

3.0

1.5

1.8

2.1

2.4

2.6

2.8

3.0

4.0

2.0

2.5

2.8

3.2

3.5

3.7

4.0

4.

2.3

2.8

3.2

3.6

3.9

4.2

4.5

5.0

2.5

3.1

3.5

4.0

4.3

4.7

5.0

5.5

2.8

3.4

3.9

4.3

4.8

5.1

5.5

6.0

3.0

3.7

4.2

4.7

5.2

5.6

6.0

0

°

 Replacement Nozzles

  

Nozzle 

Mi-T-M Part #

 

 

 

3.0  

18-0149 

 

 

4.0  

18-0045 

 

 

4.5  

18-0111 

 

 

5.0  

18-0046 

 

 

5.5  

18-0010 

 

 

6.0  

18-0047

Содержание RC-0002-0001

















Отзывы: