Mi-T-M EH-2303-0M30, Руководство оператора

Страница: 8 / 24

8
THINGS TO CHECK REGULARLY
1. Check for SYSTEMS LEAKS. Leaks in the pressure side of the system can cause premature
wear (or even failure) of the pump. The WARNING signal for this kind of leak is “frequent”
cycling of the Unloader. (“FREQUENT” means more than once every 2 minutes in the
“Gun-Off” position.) Check the gun and swivel joints for leaks.
2. Check the OIL LEVEL at least once a week. Add ONLY the type and grade of oil specified for
this pump. (See Parts List.)
3. CHANGE OIL as recommended.
4. After you use chemical additives, thoroughly FLUSH the system with clean water.
5. Inspect the POWER CORD regularly. Also check the POWER OUTLET SOCKET.
For safety, replace worn or damaged parts immediately.
6. Never run the washer without water. TURN WATER ON FIRST.
7. PROTECT FROM FREEZING! When transporting your washer in temperatures below 32°F
(0°C), WINTERIZE the pump, hoses and gun.
WINTERIZING YOUR PRESSURE WASHER
1. Shut off the water supply and disconnect the hose at the water source.
2. Put the end of the water hose into a 4 litre jug of windshield washer anti-freeze.
3. Turn on Cleaner and open gun until liquid comes out of nozzle "foamy" or "soapy".
CAUTION: If your high pressure hose is longer than 26 feet, the 4 litre bottle of
anti-freeze may empty before liquid from the nozzle gets foamy.
4. Put gun in "OFF" position for 5 seconds to get anti-freeze into bypass line. Shut
off motor.
5. Disconnect the water hose at the machine.
6. The unit, pressure hose and gun are now winterized.