4
When unpacking the unit, if you find damage due to shipping, contact your dealer or Mi-T-M
Corporation immediately,
ELECTRICAL SUPPLY
Arrange with an electrician to install a properly grounded, three phase service. To protect the
receptacle from splashes, the recommended height above the ground level is a minimum of
four feet. A ground fault interrupter (GFI) should be used. Make sure the supply voltage is
correct. The voltage is shown on the rating plate of the unit, or see “Specifications, Features
and Options” sheet in this manual.
IMPORTANT!
DO NOT CHANGE THE AC PLUG ON THE UNIT TO A DIFFERENT TYPE DO NOT CUT
OFF THE GROUND PIN OR THE OPERATOR WILL BE EXPOSED TO SEVERE SHOCK.
KEEP ELECTRICAL CORDS AND CONNECTIONS DRY AT ALL TIMES.
INCOMING WATER SUPPLY
Connect a garden hose to the water inlet of the unit. The water supply must be able to deliver
5-8 gallons per minute at a minimum pressure of 5 psi. See “Specifications, Features and
Options” sheet in this manual.
HIGH PRESSURE NOZZLE
Attach the high pressure nozzle (sent with operator's manual), to the trigger gun extension.
PRE-OPERATING INSTRUCTIONS
Содержание EH-2303-0M30
