Mi-T-M AW-7020-8000, Инструкция по эксплуатации и перечень запасных частей

Страница: 5 / 20

Rotary Surface Cleaner Manual (18 Inch) 2000 5
POTENTIAL
CONSEQUENCE
HAZARD
RISK OF INJECTION
OR SEVERE CUTTING
INJURY
When using this product, basic precautions should always be observed, including the following:
READ ALL SAFETY WARNINGS BEFORE USING ROTARY SURFACE CLEANER
PREVENTION
Serious injury or death could
occur from high pressure
spray penetrating the skin.
Keep clear of nozzle and spray! Never
put your hand, fingers or body directly
over the spray nozzle.
Never point the high pressure
discharge spray at yourself or anyone
else.
This product is to be used only by
trained operators.
Always keep operating area clear of all
persons.
DO NOT allow children to operate this
unit.
If an accident does occur, and the
spray appears to have penetrated the
skin, SEEK EMERGENCY MEDICAL
CARE. DO NOT TREAT AS A SIMPLE
CUT! Be prepared to tell a physician
exactly what kind of cleaning agents
you were using by reading the
Detergent Label and the Material
Safety Data Sheet (MSDS) provided
with your detergent.
High pressure hoses should be
inspected daily for signs of wear. If
evidence of failure exists, promptly
replace all suspect hoses to prevent
the possibility of injury from the high
pressure spray. If a hose or fitting is
leaking, NEVER PLACE YOUR HAND
DIRECTLY ON THE LEAK.
Before using rotary surface cleaner, or
when quick connecting high pressure
hoses, be certain the "collar" on
the female quick connect is locked
securely to prevent accidental
discharge and that all quick coupler
fittings are secure.
NEVER operate the gun with the
trigger wired in the open position. To
prevent accidental discharge, the
trigger gun should be securely locked
when not in use.
Before removing the spray nozzle or
servicing the unit, ALWAYS shut off
the unit and trigger the gun to release
trapped pressure. (Even after you
shut off the unit, there is high pressure
water left in the unit until you release it
by triggering the gun.) Allow the unit to
cool down and service in a clean, dry,
flat area.
Do not make repairs or
adjustments while unit is
running.
SAFETY WARNINGS