
SB44SS Outdoor Woodburning Fireplace
8
87D0059
gLaSS dOOr INSTaLLaTION
This fireplace has been tested and listed for use with optional Model
WSB54 glass doors. For installation of the Model WSB54 glass
doors, see the instructions provided with the doors.
TrIM and dOOr INSTaLLaTION
Installation of Noncombustible Trim Materials to the Front Face of the Fireplace
12”
Max.
M1002
Mantel install
8/08
Mantel Installation
Combustible Framing
Members to Top of Spacers
Combustible Mantel
Top Edge of Fireplace
18” Min. From Fireplace Opening to
Bottom of Combustible Mantel
(Manufacturuer Recommendation)
Top Edge of Fireplace
Opening
M100
M1021
facing installation
8/08
Noncombustible Facing
Material
Combustible Framing Members
Facing Material to Top of
Spacers
Figure 31
CauTION:
Do not allow any trim materials to extend closer than 3/8 inch to the vertical edges of the
firebox opening if glass doors are to be installed.
Use Only Noncombustible Materials
Below Top of Spacers
Fireplace Face
Steel Lintel
(Optional)
CauTION:
Do not cover or
restrict vent areas with any trim
materials.
WarNINg:
The space between the face
of the fireplace and the noncombustible
facing material must be sealed. Failure to
properly seal this crack can cause a pos-
sible fire hazard and will void the MHSC
warranty.
M101
Figure 32
FP2243
combustible surround
Combustible surround
materials may be placed
inside the shaded areas.
Combustibles may not
overlap edge of black
painted face more than
1/8”
Combustible Sur-
round placement
FP43
Outline of
Fireplace
Firebrick
Extend line from opposite
rear corner of firebox past
inside opening of the front
face side panel.
Do Not Restrict
Side Air Inlets
WARNING
!
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.