MHS Boilers DUOMAX N Series, Руководство пользователя, Страница: 20 / 30

page. 20
MONOMAX N / NS - NC / NCS
DUOMAX N / NS - PN / PNS
MHS
In order to fit the burner correctly, follow the below instruc-
tions:
1 - tighten the stud bolts provided with the boiler onto the
boiler door;
2 - fit the burner gasket with the burner, and then the bur-
ner;
3 - fix the burner with the flanged nuts. The slots in the bur-
ner flange allow it to be fitted and removed by simply
loosening the nuts, without having to remove them
completely;
4 - connect the burner to the power supply, fitting the plugs
into their corresponding sockets.
When fitting the burner make sure that there is a perfect
seal between the burner attachment flange and the boiler.
The wiring diagram of the heating unit, according to the
type of fuel and type of operation of the appliance, is atta-
ched.
Fuel must be supplied to the burner in compliance with the
instructions contained in the instruction manual provided
with the burner.
1 - Burner
2 - Door
3 - Insulate material
4 - Gasket
The dimensions below are for burners fitted on Monomax
NC ed NCS models:
Monomax NC - NCS Lenght L Diameter D hole
models blast tube (mm) burner (mm)
100÷1300 270 ÷ 400 280
1400, 1600,
400 ÷ 550 300
1800, 2000
2400, 3000,
530 ÷ 600 330
3500
Fitting the Burner