MHS Boilers DUOMAX N Series, Руководство пользователя, Страница: 12 / 30

page. 12
MONOMAX N / NS - NC / NCS
DUOMAX N / NS - PN / PNS
MHS
Monomax boiler units are formed by matching a gas, gas
oil or gas/gas oil mix burner, depending on requirements,
with a high quality, high performance steel boiler. To obtain
maximum perfor mance from the unit, the bur ner is
specifically designed and calibrated to match the
boiler.The quality of the burner-boiler combination in
Monomax units has been designed in minimum detail,
especially those concerning the decrease of polluting
gases, silent running and reliability.
Monomax units are available in the following versions:
- 2 stage
- gas modulating
- gas/gas oil mix
- fuel oil
Boiler Body
The body of the boiler is manufactured in thick, high quality
steel, with pressurised combustion chamber and flame
reverse, large flue gas flues which guarantee long periods
of autonomous operation and are easy to clean, equipped
with a highly efficient stainless steel baffles to increase
heat exchange; The back base also has an
anticondensation effect.
The door opening direction can be simply adjusted by
reversing its clamping elements.
Casing
The casing is packed separately from the boiler body and
is constructed of painted panels.
Insulation
Particular attention has been paid to the insulation of the
Monomax boiler body. It is composed of a thick layer of
fibreglass which completely covers the body reducing loss
of heat to a minimum and contributing towards a high level
of boiler performance.
Control Panel
The control panel of Monomax boiler has been designed
to solve all the installer’s problems relevant to electrical
connections and correct unit operation.
In fact, it is equipped with components and instruments
geared towards facilitating control and regulation of the
boiler. When the preset flue temperature limit is reached, a
warning light indicates that the combustion chamber and
flue pipes of the boiler require cleaning.
Installation
War ning: this boiler is designed to heat water to a
temperature below boiling point at atmospheric pressure; it
must be connected to a heating system and/or domestic
water production and distribution system which is within
the limits of its performance and capacity.
Any other use of this unit must be considered incorrect
and, therefore, dangerous.
The heating unit must be installed by professionally
qualified technicians, in compliance with the safety
regulations and local building regulations in force at the
time.
Warning: when installing and assembling the various parts
of the boiler, check that the ear th wire is correctly
connected.
Incorrect installation can cause damage to people and
objects for which the manufacturer is not responsible.
General Specification