MHS Boilers DUOMAX N Series, Руководство пользователя, Страница: 16 / 30

page. 16
MONOMAX N / NS - NC / NCS
DUOMAX N / NS - PN / PNS
MHS
- Wrap the glass wool around the boiler body leaving the
bulb well (P) on the top side exposed.
- Loosen screw (V) and rotate towards you the frontal part
of the electric control panel (see fig.11-2) and remove
the half cut plastic plate K
- Pass the burner connection plug through the slot on the
lower side of boiler front plate and inser t the
thermometer and thermostats bulbs in the slot K and in
the wells P (see fig. 11-4).
- Fit the panels (1S) inserting the upper fold into the
square tube and the lower fold to the boiler side frame;
repeat this operation to fit the (2S) panel
- Fit the upper panel (3S) on the boiler
- Fit the panel (1D), (2D) and (3D) ensuring that the
capillaries are inserted in the slot provided in the panel
(3D).
- Fit the electric control panel on panels (3S) and (3D)
using screw (V1) (see fig. 11-5).
- Connect electric control panel to mains supply following the
wiring diagram included in the control panel.
- Re-place the front part of the control board and tighten
the screw V.
P Bulb well for:
Regulation boiler thermostat
Security thermostat
Minimum thermostat (Pump consent
thermostat)
Thermometer
Fig. 11-1
V
V
V1
V1
K
V1
V1
Fig. 11-2
Fitting the casing Monomax N - NS - NC - NCS
(from 510 to 1300 models)
For Modulating version,
remove the original pocket
and insert the probe pocket.