26 WG20 Instructions
6 Technical characteristics
WG20 is produced by NICE S.p.a. (TV) I, MHOUSE S.r.l. is an affiliate of the Nice S.p.a group.
Nice S.p.a., in order to improve its products, reserves the right to modify their technical characteristics at any time without prior notice. In any case,
the manufacturer guarantees their functionality and fitness for the intended purposes.
Note: all characteristics refer to a temperature of 20°C.
WG10 gearmotor for swing-leaf gate
Type
Electromechanical gearmotor for automated gates and doors
Adopted technology
24Vdc motor, helical teeth reduction gear; mechanical release
Peak thrust
1800N
Nominal thrust
1200N
Idling speed
13 mm/s in "slow" speed mode; 24 mm/s in "fast" speed mode
Nominal torque speed
9 mm/s in "slow" speed mode; 16 mm/s in "fast" speed mode
Stroke
480 mm
Maximum frequency of cycles
60 complete cycles per day (the CL20 control unit allows up to a maximum of 10 cycles per hour)
Maximum continuous cycle time
approx. 4 minutes
Working limits
Its structural characteristics make it suitable for use on gates weighing up to 400Kg or leaves up to 4,5m
wide and with opening angle up to 130°
Power supply
24Vdc for "slow" speed and 36V dc for "fast" speed
Nominal input power
2,3A; the peak current is 3,2A for maximum 3s; equivalent to a peak power of 60W (*90W) and 90W (*120W).
(* "fast" speed values)
Operating ambient temperature
-20 ÷50°C (the efficiency of the gearmotor decreases at low temperatures)
Suitable for use in acid, saline or
potentially explosive atmosphere
No
Mounting
Horizontal using the special mounting brackets.
Protection class
IP44
Dimensions / weight
908 x 100 h 117/ 10kg
PH1 Photocells
Type
Presence detector for automated gates and doors (type D according to EN 12453 standard) consisting of
a "TX" transmitter and an "RX" receiver
Adopted technology
Optical, by means of direct TX-RX interpolation with modulated infrared ray
Detection capacity
Opaque objects located on the optical axis between TX and RX, larger than 50mm and moving slower than
1.6m/s
TX transmission angle
Approx. 20°
RX reception angle
Approx. 20°
Useful capacity
Up to 10m for maximum TX-RX misalignment of ± 5° (the device can signal an obstacle even in the case of
adverse weather conditions)
Power supply/output
The device can be connected only to "ECSBus" networks from which it receives the power supply and
sends the output signals.
Absorbed power
1 ECSBus unit
Maximum cable length
Up to 20 m (observe the directions regarding the minimum gauge and type of cable)
Addressing possibility
Up to 7 detectors with protection function and 2 with opening command function. The automatic
synchronism prevents any interference among the various detectors
Operating ambient temperature
-20 ÷50°C
Suitable for use in acid, saline or
potentially explosive atmosphere
No
Mounting
Vertical, wall-mounted
Protection class
IP44
Dimensions / weight (TX and RX)
95 x 65 h 25mm / 65g
