MHG Heating Gassero Alubox 1100, Инструкция по установке и эксплуатации

Страница: 44 / 66

© MHG Heating Ltd
44
MHG Heating Ltd Unit 4 Epsom Dow ns Metro Centre, Waterfield, Tadw orth, Surrey KT20 5LR
Telephone 01737 358000 Fax 08456 448803 Email info@mhgheating.co.uk Web w w w .mhgheating.co.uk
010717
6141 Water pressure min ----/0.0 - 10.0 0.8 Bar
6142 Water pressure critical min ----/0.0 - 10.0 0.5 Bar
6143 Water press. switching diff. 0.0 - 10.0 0.3 Bar
6150 Water pressure 2 max ----/0.0 - 10.0 3 Bar
6151 Water pressure 2 min ----/0.0 - 10.0 0.8 Bar
6152 Water pressure 2 critical min ----/0.0 - 10.0 0.5 Bar
6153 water press. 2 switching diff. 0.0 - 10.0 0.3 Bar
6180 Water pressure 3 max ----/0.0 - 10.0 3 Bar
6181 Water pressure 3 min ----/0.0 - 10.0 0.8 Bar
6182 Water pressure 3 critical min ----/0.0 - 10.0 0.5 Bar
6183 Water press. 3 switching diff. 0.0 - 10.0 0.3 Bar
6200 Save sensors No, Yes No -
6204 Save parameters No, Yes No -
6205 Reset to default parameters No, Yes No -
6212 Check no. heat source 1 0 - 199999 12 -
6213 Check no. heat source 2 0 - 199999 0 -
6215 Check no. storage tank 0 - 199999 0 -
6217 Check no. heating circuits 0 - 199999 101 -
6220 Software version 0 - 99 03.5 -
LPB System
6600
Device address 0 - 16 1 -
6601 Segment address 0 - 14 0 -
6604 Bus power supply function Off, Automatic Automatic -
6605 Bus power supply state Off, On On
6610 Display system message No, Yes Yes -
6611 Sys message alarm No, Yes No -
6612 Alarm delay ----/2
– 60
---- Min.
6620 Action changeover function Segment, System System -
6621 Summer changeover Local, Central Local -
6623 Optgmode changeover Local, Central Central -
6624 Manual source lock Local, Own segment Local -
6625 DHW assignment
Own controller, All controllers within
own segment, All controllers within
system
All controllers within
system
-
6630 Cascade master Always, Automatically Automatically -
6631 Ext source in Eco mode Off, On DHW, On Off -
6632 Note OT limit ext source No, Yes No -
6640 Clock mode
Autonomously, From BUS slave
without remote setting, From BUS
slave with remote setting, Controller
is clock time master
Autonomously -
6650 Outside temp source S0/G1
– S14/G16
S0/G1 -
Fault
6700 Message
No error, Error 1…….
No Error -
6705
Internal value of diagnostic
code
-
6706 Current value of lockout phase -
6710 Reset alarm No, Yes No -
6740 Flow temp 1 alarm ----/10
– 240
---- Min.
6741 Flow temp 2 alarm ----/10
– 240
---- Min.
6742 Flow temp 3 alarm ----/10
– 240
---- Min.