Page 20 of 36 A80H0321
1
Duty type
2
Protection degree
3
Insulation Class, the letters TR following the insulation class means tropicalized treatment
4
Weight (Kg)
5
Motor type designation
6
Serial Number
7
Maximum Static Brake Torque obtainable with proper regulation of the springs (Nm)
8
Brake current (A)
9
Brake Voltage Supply (V). On brake motors with AC brake, the symbol “Vb = Vm” indicates that the motor and brake
have the same voltage supply. For the motor with DC brake the indication 1~230V or 1~400V represent the AC side
single phase input voltage to the rectifier (230V or 400V)
10
Rated Power (kW) at 50 Hz
11
Power Factor at 50 Hz
12
Motor Speed (RPM) at 50 Hz
13
Motor Voltage Supply at 50 Hz in Delta configuration (V)
14
Motor Amps at 50 Hz in Delta configuration (A)
15
Motor Voltage Supply at 50 Hz in Star configuration (V)
16
Motor Amps at 50 Hz in Star configuration (A)
17
Rated Power (kW) at 60 Hz
18
Power Factor at 60 Hz
19
Motor Speed (RPM) at 60 Hz
20
Motor Voltage Supply at 60 Hz in Delta configuration (V)
21
Motor Amps at 60 Hz in Delta configuration (A)
22
Motor Voltage Supply at 60 Hz in Star configuration (V)
23
Motor Amps at 60 Hz in Star configuration (A)
24
Motor voltage supply at 50 Hz (V)
25
Motor Amps at 50 Hz (A)
26
Motor voltage supply at 60 Hz (V)
27
Motor Amps at 60 Hz (A)
28
Mounting position
29
Motor special execution identification.
For motors with additional cooling fans, the fan voltage supply is shown in
this location, preceded by the letters “VENT”. The letters “TP” indicate the presence of bimetallic thermal
protectors, “TM” indicate thermistors and “SCALD” indicates anti-condensation heaters followed by their voltage
supply.
30
Efficiency and efficiency class (IE) at 50Hz
31
Efficiency and efficiency class (IE) at 60Hz
32
Certification marks (cCSAus, CCC , etc.)
33
DM, if present, means double terminal board.
34
Number of the motor winding phases ( 3= three phase, 1=single phase)
