MGI NAVIGATOR GPS, Руководство по обслуживанию/эксплуатации

Страница: 16 / 37

16
In the unlikely event of your buggy stopping, the reason could be the fuse has blown.
Check and replace if necessary.
The replacement of the fuse will allow you to continue using your buggy. If the fuse
blows, contact your service centre.
2.4 Fail Safe Connection
Your buggy has been equipped with fail safe battery connection. Your buggy will only
start once you increase the speed control.
2.5 Attaching/removing wheels
If your buggy comes with the wheels off, they should be placed in position prior to
unfolding. To put the wheels on you will need to align the four slots on the inside of the
wheel with the same four on the drive dog on the axle. To engage the rear wheel,
depress the quick release catch until the wheel is in place.
Align the four slots on the wheel with those on the drive dog teeth.
Depress the quick release catch, whilst putting wheel in position on the axle
Your NavigatorGPS buggy uses a gear system, whereby the two rear drive wheels do
not free wheel. The motor needs to be running for the buggy to move. Drive will only
occur when the speed control is turned on.