3
www.mgfcompressors.it
–
Ourcompany is not responsible for accidents deriving from the use of the machine by NOT TRAINED and
not qualified personnel, for aims different from the ones indicated above.
10.
SAFETY REGULATIONS
Warning!
Respect the following safety regulations for the use of electric tools in order to protect yourself
against electric shocks, dangers of lesions or fire.
Consider the working environment:
- Do not expose electric tools to rain and do not use them in moist or wet environments;
- Provide for a good lighting:
- Do not use electric tools in areas with risk of fire, near liquids or inflammable gases;
- Do not work in closed environments without an adequate change of air.
Protect yourself against electric shocks:
- Avoid the contact with grounded components (hoses, hot plates, refrigerators, electric heaters);
Keep the tools in a safe place:
- The tools not currently used must be put in a dry and well-sheltered place:
- Not trained people must keep away from the machine; above all, it cannot be placed in areas easily reachable
by children;
Do not use the cables for aims different from the expected ones:
- Do not transport the tool by its cable and do not extract the plug by pulling the cable.
- Protect the cable against oil, acids, heat sources and sharp edges;
Take care of the tools:
- Keep the tools clean and always efficient by following the use and maintenance instructions;
- Check the plug, the cable and the switch periodically, and, in case of damages, they must be replaced by
skilled personnel.
Net plug:
- In order to perform cleaning or maintenance operations always extract the net plug;
Avoid accidental starts:
- Never transport the tools connected to the net when your fingers or hands are on the switch;
Supply extension cable:
- In order to use it outdoors, use only type approved extension cables for external use, and replace them if
they are damaged.
11.
SAFETY REGULATIONS DURING THE USE
-
The machine cannot be used in explosion-prone areas;
-
Incendiary sources such as free flames, cigarette smoking, sparks, incandescent wires, and overheated
surfaces, etc. must not be present in the environment during use;
-
Make sure no liquids and/or substances evaporating during use are sucked up by the machine;
-
Make sure the area is well ventilated during use, and consider the direction of the wind if you are using it
outdoors;
-
During the spraying, always place the machine behind the operator and never direct the jet in the
direction of the machine itself;
-
The operators must wear the suitable protections during the spraying operations (protective masks,
gloves, clothing, etc.);
-
Always check the supply voltage comparing it with the data reported on the plate;
-
Switch off the machine immediately when you hear noises or you fear possible accidents;
-
Use only original spare parts;
-
The possible damaged units must be repaired only by authorized Customer Care Service.
Our company declines every responsibility whatsoever in case the user does not observe said safety criteria;
furthermore, it is not responsible for any kind of negligence when using the equipment or tampering.
12.
INSTALLATION (see drawing B)
1)
Using the two-pin connection (bayonet connection), connect the hose to the turbine side, by making
it turn clockwise without
