Introduction
Introduction
Congratulations! The tool you’ve purchased has been made with high quality materials and high end machining technologies.
Compliance to our high quality standards will ensure you long time performances and reliability.
Read carefully this booklet and keep it in a safe place, to enjoy all the features of this professional tool and to work in an easy and safe
way.
Purpose of use
Purpose of use
This pump has been engineered for small transplanting and fillings and for plants test with water. The pump can work with all kind of
liquid with a maximum viscosity of 1.5 m Pa
s and with water solutions with PH between 7 and 12.
MGF
MGF
refuses every responsibility for damages or bad working if the pump is used incorrectly, for a purpose for which it was not
intended or is tampered.
TECHNICAL ASSISTANCE MGF TOOLS
For any technical assistance contact us in one of the following ways:
phone:
+39 0521 818301
fax:
+39 0521 818202
e-mail:
We will serve you in the shortest possible time.
Material being shipped for repair must be authorized by the RMA (binding condition for the withdrawal of any goods to be repaired).
TECHNICAL FEATURES
Dimensions
975 x 570 x 600 mm
Weight
132 Kg (140 w/ case)
Working Pressure
0 – 500 bar
Flow rate
7 – 15 L/min
Inlet
clean water, 1 bar min
Max water temperature
60 °C
Motor
400 V ~ 50 Hz – 3 phases
Current - Power
29 A – 15 KW
Service
S1 – Class F
CosFi
0,8
Starting - Installation
Starting - Installation
Before starting operations, check if the pump has been labelled with serial number and technical data. Check all the optionals integrity
too. Keep package for further transports or stocking.
