MGE UPS Systems 5103304 Comet EXtreme, Инструкция по установке и эксплуатации

Страница: 29 / 32

86-153719-00 B00
- Page 29
6. Appendices
Manual bypass Rotary switch controlled by the user, used to connect the equipment directly
to the AC-power source. Transfer of the load to the manual bypass enables
UPS maintenance or replacement, without interrupting the supply of power
to the connected equipment.
ON-LINE mode The normal UPS operating mode, by which the AC-power source supplies
the UPS, which in turn, following double conversion of the AC power,
supplies the connected equipment.
Percent load Ratio between the power drawn by the connected equipment and the total
power that the UPS can supply.
Personalization A number of UPS functions can be modified using the "UPS Driver" software
to better meet the user's needs.
Redundancy See "Frequency-regulation rate".
Sleep mode This function shuts down the UPS when it operates on battery power
and no load is detected on the UPS output.
Start on battery power This function makes it possible to energize the connected equipment even
when AC input power is not available (operation exclusively on battery power).
Tolerance for AC-power The range of frequency supplied by the AC-power source within which
source frequency the UPS can operate in ON-LINE mode (double conversion).
UPS Uninterruptible Power Supply.
UPS ON / OFF It is possible to enable or disable use of UPS ON / OFF controls
via software by the computer-system protection software.