MGE UPS Systems 40-150kVA, Инструкция по установке и эксплуатации

Страница: 5 / 56

Installation and User Manual
iii 86-160310-00 E00 Certification Standards and Safety of Persons
WARNING
HIGH LEAKAGE CURRENT. Earth connection essential before connecting
supply
.
ATTENTION
COURANT DE FUITE ELEVE. Raccordement a la terre indispensable avant le
raccordement au reseau.
WARNUNG!
Hoher Ableitstrom Vor Inbetriebnahme Schutzleiterverbindung herstellen
.
Certification Standards - Three Phase UPS
◗
IEC 1004/ANSI C62.41 Standards for Surge Withstand Ability.
◗
FCC Part 15, Subpart J, Class A.
◗
UL/cUL 1778, Standard for Uninterruptible Power Supply Equipment.
◗
NEMA PE 1 - Uninterruptible Power Systems.
◗
NFPA 70 - National Electrical Code.
◗
ISO 9001.
Safety of Persons
◗
The UPS has its own internal power source (the battery). Consequently, the power outlets may be
energized even if the UPS is disconnected from the AC power source.
◗
The UPS must be properly grounded.
◗
The battery supplied with the UPS contains small amounts of toxic materials. To avoid accidents, the
directives listed below must be observed:
- Never burn the battery (risk of explosion).
- Do not attempt to open the battery (the electrolyte is dangerous for the eyes and skin).
- Comply with all applicable regulations for the disposal of the battery.
- Batteries constitute a danger (electrical shock, burns). The short-circuit current may be very high.
Precautions must be taken for all handling: remove watches, rings, bracelets and any other metal
objects, use tools with insulated handles.
- Do not lay tools or metal parts on top of batteries.
Product Safety
◗
A protection circuit breaker must be installed upstream and be easily accessible.
◗
The UPS can be disconnected from the AC power source by opening the input circuit breaker.
◗
UPS must be connected to a nearby power source that is easily accessible.
◗
Never block the ventilation grates of the UPS.
◗
The UPS must be installed in a controlled environment.
Special Precautions
◗
The UPS connection instructions and operation described in the manual must be followed in the indicated
order.
◗
Check that the indications on the rating plate correspond to your AC powered system and to the actual
electrical consumption of all the equipment to be connected to the UPS.
◗
Before and after the installation, if the UPS remains de-energized for a long period, the UPS must be
energized for a period of 24 hours, at least once every 3 months (for a normal storage temperature less
than 25°C). This charges the battery, thus avoiding possible irreversible damage.