MG ZS11, Руководство пользователя, Страница: 75 / 324

INSTRUMENTS AND CONTROLS
Anti-pinch Function
The sunroof and sunshade feature an “Anti-Pinch”
function, this is a safety feature which prevents the
sunroof or sunshade from fully closing whilst in the
automatic mode if an obstruction is sensed - if this
happens the sunroof/sunshade will open slightly to allow
the obstruction to be removed.
Forcibly Closing the Sunroof (over-riding the anti
pinch)
To forcibly close the sunroof glass after an anti-pinch
intervention, gently pull the rear of the switch downwards
within 5 seconds and hold in position until the sunroof
glass is fully closed.
Note: The anti pinch function is suspended during this
operation.
Forcibly Closing the Sunshade (over-riding the anti
pinch)
To forcibly close the sunshade after an anti-pinch
intervention, press the close button within 5 seconds and
hold it until the sunshade is fully closed.
Note: The anti pinch function is suspended during this
operation.
Note: The anti-pinch function only works when closing
the sunroof during the slide operation.
Sunroof Initialisation
In the event of a power failure or battery disconnection
when the sunroof glass or sunshade is in motion, the
sunroof/sunshade will require initialisation when the power
is restored.
To carry out the sunroof glass initialisation operation:
Fully close the glass - gently pull the rear of the switch
downward and hold in position for 10 seconds, the sunroof
will open a preset amount and stop, it will then close
automatically- the sunroof glass is then initiailised. During
the whole process, the switch must remain in the pulled
down position.
59
1