MG ZS11, Руководство пользователя, Страница: 244 / 324

EMERGENCY INFORMATION
Emergency Starting
Using Booster Cables
NEVER attempt to start the engine by
pushing or towing.
Make sure that both batteries are of the same
rated voltage (12 volts), and that the booster
cables are approved for use with 12 volt car
batteries.
Ensure sparks and naked flames are kept well
away from the front compartment.
Using booster cables (jump leads) from a donor battery,
or a battery fitted to a donor vehicle, is the only approved
method of powering a car with a flat battery.
If the battery from a donor vehicle is to be used, make sure
that the vehicles are parked so that the two batteries are
adjacent to one another and that both the vehicles do not
touch.
Starting the Car
Ensure that each booster cable connection is
securely made. There must be no risk of the
clips accidentally slipping from the battery
terminals (as a result of engine vibration, for
example), this could cause sparking, which
could lead to fire or explosion.
A
B
228