MG ZS11, Руководство пользователя, Страница: 164 / 324

STARTING & DRIVING
1 Press the button (A) on the smart key to eject the
decorative trim.
2 Remove the backup mechanical key (B) in the arrowed
direction.
3 Using a suitable flat bladed tool, insert the tool into
the side of the key (C), carefully prise off the battery
cover and separate the upper and lower casings (D).
4 Remove the battery from the slot.
5 Put the new battery in the slot, and make sure it is in
full contact with the slot.
Note: Make sure that the polarity of battery is
correct ('+' side facing down).
Note: It is recommended to use a CR2032 battery.
6 Refit the cover and press tightly, ensuring the gap
around the cover is even.
7 Refit the mechanical key, and close the decorative trim.
8 Start the engine to resynchronise the key with the
vehicle.
Remote key
*
A
B D
C
148