USER GUIDE
Pneumatic Blind Stapler
TOP SP P, TOP B P
Page:
9
Version:
0711
ET 572
Page 9 of 10 18.10.11 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP P 0711.DOC
9
Error detection
During any kind of defect, the machine is to be shut down and separated from the
pressurized air supply until the flawless operation is ensured again. Please do not
try to dismantle or repair the machine.
9.1 Removing jammed staples
If there is a malfunction or staples are jammed proceed as described in the following.
In the event of a malfunction, which is more extensive than just some jammed
staples, please contact us. The machine will be examined by our specialists
and the malfunction will be remedied.
•
Interrupt the air supply.
•
Remove any staples still present in the staple repository.
•
Remove the two screws (12) and extract the
staple repository (03)
•
Remove
all
the staples from the unit and clean
the machine from dirt and debris.
•
After the staples have been removed, the repository is to be
inserted again.
•
Reconnect the air supply.
10 Technical Data
Machine:
TOP SP P, TOP B P
Air pressure during the stapling process:
4 to 6 bar, cylinder max. 7 bar
Air consumption during the stapling:
0.48-0.72 NL/stapling
Stapling speed
approx. 0.2 s/stapling
Weight without the staples
approx. 2.9 kg
Length x Width x Height
350mm x 85 mm x 188 mm
Air supply connection:
6mm = ¼”
Staple for TOP SP P
TOP SP 11, TOP SP 18
Staple for TOP B P
TOP B 10, 12 und TOP B 15
Capacity:
120 staples
Noise emission:
< 70 dB(A)
12
03
