USER GUIDE
Pneumatic Blind Stapler
TOP SP P, TOP B P
Page:
5
Version:
0711
ET 572
Page 5 of 10 18.10.11 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP P 0711.DOC
With the TOP blind stapler a bottom stapling of empty boxes is also possible. The machine is hereby
introduced into the empty box and stapled from the inside outwards, or the empty carton is placed over
a buck and stapled from the outside inwards. After the empty carton is filled and the top stapled, the
bottom side can also be stapled just like the top after turning it over.
3.2 Ambient conditions
The machine should be operated at room temperature, protected against environmental influences.
Use within an explosive atmosphere is permitted only with prior consent and written permission of the
manufacturer.
3.3 Operating personnel
Only trained and knowledgeable staff is permitted to operate the machine.
Note:
Competent, is someone who based on his training and experience has sufficient knowledge in
the field of stapling machines and is familiar with the relevant government industrial safety regulations,
accident prevention regulations and the generally accepted rules of technology (e.g. DIN standards,
VDE regulations) to the extent that he can assess the secure state of machines and in particular the
state of stapling machines.
4
Transport and initial commissioning
The stapling machine is delivered completely assembled and can be transported as a whole.
Transportation equipment can also be used for transporting the machine.
Before the stapler is put into operation, please read all instructions in this manual. This stapling
machine may only be put into operation by trained personnel.
To make the stapler ready for operation after delivery, the following tasks must be carried out:
-
Check the equipment for completeness
-
Insert the staples.
-
Connect the pressurized air and set it to 4 (min.) – 6 bar (max.)
The stapler is delivered ready for operation.
When the stapling machine is ready for operation, it is prohibited to touch the
stapling ejection opening or the running stapler! DANGER OFINJURY!
Oxygen or combustible gases may not be used as a propulsion source for pressure
driven machines.
