mfh systems AIRUNIT GEMINI, Руководство по установке

Страница: 10 / 19

10
After completion of the insulation / plaster work, remove the
wall covers on the interior and exterior side. Adapt the wall
duct to the dimension of the fi nished wall by trimming the wall duct
fl ush with the
room or facade side using a carpet knife or a hot wire.
To protect against water penetration into the wall opening,
the facade-side transition to the wall duct must be saled
circumferentially using a suitable sealant!
Install the weather protection hood to the AIRUNIT GEMINI ventila-
tion unit. The hood is mounted onto the attached lugs on the upper
edge of the wall panel and fi xed to the underside of the wall bracket
with the supplied fi xing screw.
Subsequently, install the wall panel to the weather protection hood
using suitable attachment elements.
Glue the sealing tape supplied to the back of the outer wall panel all
the way round.
8 Completed installation