Version: 21/03/2017
Filename: NA-MHF-19-20-COD-E_version2.doc
© Meyrat SA 2017
19 / 26
6 Installation and activation
6.1 Safety during installation and activation
!
DANGER!
The following safety measures and warnings must be strictly observed and
respected. Non-compliance can put persons in danger and/or damage equipment.
-
The spindle can only be installed or activated by persons who are trained and
sufficiently qualified for the tasks envisaged.
-
It is the responsibility of the client to take care that the competencies and the
qualification verification of persons implicated in the various activities relating to
the installation and activation are clearly defined and respected.
-
All persons involved in the installation and activation of the spindles must have
read and understood the instructions in this manual.
-
No modification or addition to the spindle or the peripheral devices delivered by
MEYRAT SA can be undertaken without written authorisation from MEYRAT SA.
-
All the safety features must be linked to the controls of the machine according to
their function and cannot be short-circuited or removed.
6.2 Preliminary work
Before beginning the installation work, please check:
Delivery
-
if it is complete and correct in conformity with the delivery note.
-
if it has been damaged in transport (all damages must be reported to the carrier and to the
supplier within 10 days of the reception of the merchandise).
Peripheral devices
Several peripheral devices are necessary for the operation of the spindle. Check that all the peripheral
devices are available an
d that they meet the minimum requirements according to section 2 “Technical
characteristics”
Note
NOTE!
The installation of the peripheral devices is not described in this assembly
instructions. The corresponding directives are found in the separate documentation
supplied with each peripheral device.
