Meyra iChair DYNAMIC 1.623 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 48

Meyra iChair DYNAMIC 1.623 Скачать руководство пользователя страница 18

18

HEAD SUPPORT

Observe danger of jamming in the adjustment sector!
After adjustments conduct a functionality check.

☞

Therefore observe chapter

Functional checks

The head support [1] is height and depth adjustable as well
as removable.

☞

We recommend the fitting of two rear-view mirrors for
driving with a head support.

Adjusting the head support cushion

1. After loosening the clamping screw (5), the head sup-

port cushion (2) is continuously adjustable to the de-
sired position.

2. Afterwards retighten the clamping screw (5).

Adjusting the depth of the head support

1. Operate the clamping lever (4) to adjust the depth of

the head support.

2. The head support cushion (2) is continuously adjustable

to the desired head support depth.

3. Afterwards retighten the clamping lever (4).

Adjusting the headrest height

1. Operate the clamping lever (6) to adjust the height of

the head support.

2. The head support (3) is continuously adjustable to the

desired head support height.

3. Afterwards retighten the clamping lever (6).

Removing the head support

1. Operate the clamping lever (6) to remove the head sup-

port (3).

2. Pull the head support upward out of the clamping de-

vice (7) [9].

3. Retighten the clamping lever (6) after inserting the head

support (3).

Removing the head support bracket

To dismantle the head support bracket (7), remove the at-
tachment screws (8) on both sides.

1

6

2

3

7

8

9

4

5

6

«
...
16
17
18
19
20
...
»

Содержание iChair DYNAMIC 1.623

















































Отзывы:

Нет отзывов