Meyra 9.050, Руководство по эксплуатации

Страница: 17 / 40

1
2
3
17
Swivelling in the leg supports
☞
Note:
After audibly swivelling the leg
supports inward check the locking
device of the respective leg sup-
port.
☞
Afterwards observe chapter < Low-
er leg support >.
– For inward swivelling, let the leg
supports swivel forward until the
locking device audibly engages [1].
Removing the leg supports
For easy transfer into and out of the
wheelchair as well as a reduced wheel-
chair length (important for transport)
the leg supports can be removed [2].
☞
Note:
Before removing the leg supports
loosen or remove the calf belt on
one side.
☞
View chapter < Calf belt >.
– First swivel the leg support side-
ways [3] and then remove them
toward the top [2].
☞
Therefore observe chapter < Swiv-
elling away leg supports >.
Attaching the leg supports
☞
Note:
After attachment swivel the leg
supports inward.
☞
Therefore observe chapter < Swiv-
elling in the leg supports >.
– Press the leg supports, swivelled
to the side, parallel to the front
frame tube and lower it into place
[3]. – In doing so the holding pin
must slide into the frame tube.