background image

1

2

3

A

13

Drum brake for accompany-
ing persons

The drum brake is operated by the 
accompanying person by way of the 
brake levers (1) on the extended push 
handles or the pushing rod.

!

 

Attention:

 

With the drum brakes version, the 
accompanying person must not lift 
the wheelchair on the extended 
push handles. – This may lead to 
bending in the subsequently ex-
tended push handles to bend.

Function as operating brakes

Pull both brake levers evenly and only 
lightly in order to achieve a controlled 
deceleration of the wheelchair.

Locking the drum brakes

–  Pull both brake levers evenly in 

order to secure the wheelchair 
against unintentional motion [2].

–  Press the surface (A) of the locking 

latch down with one fi nger and let 
it snap into place.

–  Release both brake levers. – De-

pending on the setting, the respec-
tive locking latch will click into the 
fi rst or second latching position 
and lock the brake.

  

Note:

 It should not be possible to push 

the wheelchair forward when both 
brakes are locked.

 If the third locking position (C) is 

required to activate the brake, it 
must be readjusted by a specialist 
workshop.

Releasing the drum brakes

Pull both brake levers until the lock-
ing latches (3) automatically jump out 
of the lock.

Let go of both brake levers. – The 
parking brakes are released and the 
wheelchair ready for use.

Содержание 9.050









































Отзывы: