2
1
3
35
BACK SUPPORT
The back support can be folded down for
storage or transport.
☞
For better demonstration of the wire
cable (1) the back support is shown
without cushion.
Folding down the back support
☞
If required remove the seat pad (velcro
fastener).
Disengage the back support by pulling or
pressing the wire cable (1) at its centre and
fold it onto the seat [2].
Unfolding the back support
For this raise the back support and pull the
pressure bolts inward by pulling or pressing
on the wire cable (1).
Release the wire cable in order to lock the
back support in the desired position (3).
– Slide the back support until the pressure
bolts audibly click into place.
If required replace the seat pad.
☞
The greasing of the thrust bolts is rec-
ommended for an easier latching of the
backrest.
☞
Check the secure locking in of the back
support.
Adjusting the back support angle
Unlock the back support by pulling or press-
ing the centre of the wire cable (1).
Release the wire cable in order to lock the
back support in the desired position (3).
– Slide the back support until the pressure
bolts audibly click into place.
☞
Check the secure locking in of the back
support.
Содержание 1.610 MC1
Страница 87: ...87 NOTES...